DENON Service Bulletin DZ10-013 free download

File name Service Bulletin DZ10-013.PDF

100 Corporate Drive Mahwah, NJ 07430 Service Bulletin No. : DZ10-013 Date: April 21, 2010 _____________________________________________________________ Model: DBP-4010UDCI Subject: Correction of the firmware of DPMS Countermeasure is applicable only upon claim from the customer. Symptom: 1) The red caution might be indicated, and the unit might not play the BD disc "AVATAR". 2) The characters become garbled on the GUI screen with CD playback. 3) DBP-4010UDCI not Compatible with Runco DHD3 Processor. Solution: We corrected the firmware so that no malfunction occurs. Please do not use a Proxy for updating in the Network environment! If the customer uses a Proxy setting the unit won't update the firmware properly. Caution: It is necessary to initialize the unit before the update work begins. The customer has to initialize their BD/DVD Player. Please update the firmware after you confirm this matter to the customer. Updating the firmware (Refer to the Instruction Manual.) 1) Turn the Power Supply of the unit off. 2) Connect the Ethernet terminal of the unit to the Network line by Ethernet straight cable. (Don't use Ethernet cross cable.) 3) The connection of the network recommends the Ethernet cable for certain update. 4) Turn the Power Supply of the unit on. 5) Remove the Disc from the Tray. 6) Please confirm! "NO DISC" on the FL Display. 7) The unit sets the Internet. It wishes waiting for about two minutes until customer's router ends the setting. ______________________________________________________________________________________ CONFIDENTIALITY NOTICE: The information contained in this document is intended for the exclusive use by DENON Authorized Service Centers and their employees. This document may contain information that is privileged, confidential and may be protected from disclosure under applicable laws and terms of the DENON Service Agreement. Any distribution, disclosure, dissemination or copying of this document and the information it contains is prohibited. No responsibility will be accepted by DENON for any damage, injury or loss resulting from the misuse of the information contained in this document. Caution: The update doesn't succeed when the customer's set cannot hook up to the Internet correctly. In this case, please confirm the internet environment of the customer house. Whether the Internet radio can be received correctly or not is a good indicator of the customer's internet connection. There are some problems under the internet environment when the Internet radio can not be received. 8) Press "SETUP" button on the Remote control and indicates the GUI menu. 9) Press "CURSOR" button. 10) The GUI indicates, "Other Setup" > "Firmware Update". Caution: The update interrupts when it is not possible to conne